Introducing a New Approach To 3D Mapping
Solid-State LiDAR Reference Design
Newsight’s enhanced Time-of-Flight (eTOF™) solid-state LiDAR is our new
complete solution for a versatile and affordable 3D mapping device. Based on the
successful NSI1000 sensor, the reference design supports the patented eTOF™
technology for improved performance. The reference design is highly
configurable for different applications and very flexible in coping with different
scenarios and environmental conditions. The eTOF™️ LiDAR is designed for a wide horizontal field of view (FOV) and a high
frame rate. It provides high accuracy and precision with a high dynamic range.
Depth Imaging Using eTOF™
close
Depth Image Color Coded, Before Image Processing
Original Setting
Product Features
Acquisition
32x1024 depth points
Low cost
Ideal for mass deployment
FOV
Horizontal 30° - 120°
Vertical 1.17° - 4.7°
Vertical 1.17° - 4.7°
Indoor-outdoor
Auto exposure
Object Detection
Of different colors/grays
Range
0.2 to 100 meters
Distance error < 1%
Distance error < 1%
| Parameter | enhanced Time-of-Flight (eTOF™) |
|---|---|
| Resolution (H x V Pixels) | 1024 x 32 (full resolution) |
| Field of View (H x V) | 30/60/120 x 1.37/2.74/4.7 |
| Indoor Range | 0.2-100 meter |
| Outdoor Range | 0.2-50 meter |
| Accuracy | Better than 1% |
| Power Consumption | Low |
| Depth Image Max Frame Rate | 200 fps (for 2 meter) |
| Communication Interface | USB-C, UART, MIPI |
| Camera Power Requirements | 5 VDC, supplied via the USB connector |
| Size (W x H x L) | 99.6 mm x 80.6 mm x 63.1 mm |
Module includes:
• NSI1000 sensor pixel array 32 x 1024, global shutter
• RDC board
• On-board ST MCU – ARM® Cortex®-M4, 1M Flash.
• Imaging lens with a BP filter to fit selected FOV
• On-board VCSEL and driver with high peak power. Full software application package
• RDC board
• On-board ST MCU – ARM® Cortex®-M4, 1M Flash.
• Imaging lens with a BP filter to fit selected FOV
• On-board VCSEL and driver with high peak power. Full software application package
See Beyond the Fog
